Landscape lighting,
Toronto-specific.
Heritage districts, mature canopy, tight setbacks, and architecture that ranges from Victorian-era to glass-and-steel contemporary. Toronto is its own design problem — and after twenty years of working in it, we've learned to design for the city's specifics.
Toronto is not like the suburbs.
Most of the GTA's premium residential streets have something Toronto doesn't: room to work. Wide lots, generous setbacks, and the freedom to design without coordinating around a heritage panel or a 100-year-old maple two feet from the property line.
Toronto is the opposite. Tight setbacks. Heritage protection across whole neighbourhoods. Mature canopy that's older than most of the homes under it. And architecture that ranges from Victorian-era to Bridle Path glass-and-steel — sometimes on the same block. Lighting design here is constrained at every step. Done right, the constraints become the design.
Heritage Conservation Districts. In scope.
Forest Hill, Rosedale, and Lawrence Park sit within Heritage Conservation Districts with specific lighting requirements: dark-sky-compliant fixtures only, no light source visible from the street except integrated path and step lighting, no contemporary stainless fixtures on Victorian-era homes. Period-appropriate brass and copper throughout.
We handle the HCD review submission on every project within a designated district. It's part of the design brief, not a separate engagement. If you're in Forest Hill or Rosedale and a contractor isn't talking to you about HCD compliance during the consultation, that's a flag.
Mature canopy is the subject.
Toronto's residential streets are defined by canopy. Mature oaks, maples, and beeches that are often older than the homes themselves. Lighting design in the city is largely about how you handle these trees — uplighting at the trunk to reveal architecture, downlights mounted high in the canopy to mimic moonlight through leaves, and careful aim that respects how the tree's silhouette changes between summer and winter.
Tree-mounted fixtures use specialized arborist-grade hardware that doesn't girdle the tree or restrict growth. Mature canopy is a 60+ year investment; we treat it that way.
Tight setbacks demand restraint.
Toronto lot widths run narrower than the rest of the GTA. The front garden between the sidewalk and the house is often less than fifteen feet deep. There's no room for a stack of pathway lights; the right answer is usually fewer fixtures, more careful placement, and a willingness to leave parts of the property unlit.
This is also where vibratory trenching alongside hardscape and hand-trenching in mature beds matters most — Toronto landscapes have nowhere to hide damage. Every cut needs to be clean, every bed needs to be restored at the end of each day, every fixture needs to look like it was always there.
Most Toronto homes land in Signature or Reserve.
Toronto's combination of tight setbacks and complex architectural detail means most projects are mid-scale rather than estate-scale. A Toronto home typically needs more design work per fixture than a suburban project — but fewer fixtures overall. Most of our Toronto work falls in the Signature or Reserve tiers below, with the occasional Legacy project on Bridle Path properties.
Across the city, in the residential core.
Forest Hill · Rosedale · Lawrence Park · Bridle Path · Hoggs Hollow · Moore Park · Bayview / York Mills · The Beaches · High Park North · Casa Loma · Anywhere in the residential core. If you're elsewhere in Toronto, ask — we cover the full city when scope warrants.
Bright. White. Unmissable.
Most outdoor lighting on premium homes was installed by someone who treated light as wattage instead of as a material. Cheap aluminum fixtures throw harsh light sideways and upward. Cold white LEDs make stone look grey. Floodlights blast the corners of the house and bleed into the neighbour's windows. The home is technically lit. It looks worse than when it was dark.
We install the version of outdoor lighting that doesn't do any of that.
Three specifications. No shortcuts.
The difference between professional outdoor lighting and a $300 box-store kit is not the price. It's three specific decisions, and we don't compromise on any of them.
Solid brass. Built to outlast the install.
Aluminum fixtures pit, chalk, and fail within two seasons in Ontario weather. We don't use them very often
- Cast brass body and stem on every fixture
- Develops a patina over time — better with age, not worse (black brass also available)
- Sealed against moisture, salt, and freeze-thaw cycles
- Lifetime warranty on the fixture itself
- Made by manufacturers we have vetted and are confident in
Warm 3000k. Like candlelight, not a parking lot.
Cheap installs use 4000K or 5000K LEDs because they're brighter. They also make your home look institutional.
- 2700K colour temperature — the same warmth as incandescent
- High-CRI LED so stone, brick, and wood show true colour
- Dimmable across the entire system, not just on/off
- Smart timers and astronomical clock control included
- Replaceable LED modules, not throwaway sealed units
Fully shielded. No glare. No spill.
Light should illuminate your architecture, not your eyes, your neighbour's bedroom, or the night sky above.
- Every fixture aimed and shielded to direct light precisely
- Dark Sky compliant — no upward light pollution
- No glare visible from the street or driveway
- Designed on-site at dusk so you see it before you commit
- Plan documented on paper for future reference and warranty
Years of work that keep Ontario homeowners talking.
Real reviews from real clients
Matt and his team did an excellent job installing fifty-plus outdoor lights and the control system. Matt is a professional and values customer service more than anything.
The big difference was in workmanship. Matthew's attention to lighting detail was immaculate. He wouldn't leave until he was completely satisfied — even though I thought his initial work was already outstanding.
Matt designed a new layout to address our mature garden and selected fixtures to enhance the hard and soft structures. Work was done efficiently and professionally. The property looks spectacular at night.
4-Year Warranty
Workmanship & fixture coverage
Kichler Pro
Premium fixture partnerships
20+ Years Experience
Across Southern Ontario
Thoughtful Design
No quote on the spot. Ever.
Before you book the Consultation.
How long does the actual installation take?
Most residential installs are completed in a single day on site, sometimes two for larger properties or complex landscapes. We don't trench lawns — fixtures and wiring are placed surgically with minimal disruption.
Do you service my area?
We work across the GTA — Oakville, Burlington, Mississauga, Milton, Vaughan, Markham, and surrounding — as well as London, Ontario. If your property is within a reasonable drive of either base, we'll come out.
What does a typical project cost?
Most residential installs fall between $8,000 and $25,000 depending on home size, complexity, and fixture count. We don't price over the phone — the at-dusk demo is the only way to give you an honest number.
What happens if a fixture fails years later?
Brass fixtures carry a lifetime warranty against defects, and our workmanship is warrantied for five years. If something needs attention, we're a phone call away — and we keep your design plan on file so service is fast.
Do I have to be home for the demo?
Yes — the whole point is that you see the reveal in person. The demo takes about 90 minutes, starting an hour before sunset. Bringing your spouse, partner, or whoever else makes design decisions in your household is recommended.
Still have a question?
Book the Consultation — we'll answer in person →